You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

מערכות ומוצרים

ואריוקיט VARIOKIT מערכת ליציקה בשיטת זיז מאוזן VBC

Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
The PERI solution for the cantilever method is a combination of specifically developed system components and VARIOKIT standard parts.
With optimized components of the balanced cantilever equipment, up to 5.75 m long segments can be concreted. In addition, VARIOKIT system components are used. As a result, PERI achieves maximum adaptability for different bridge cross-sections.
For the realization of the motorway bridge near Tarnow, the construction team achieved a 4 to 5 -day cycle thanks to the easy-to-use mechanical solution. At the same time, the requirements regarding the very low tolerances for the variable bridge cross-section could be fulfilled.
The combinability of the balanced cantilever equipment with the PERI UP modular scaffold allows – as part of the comprehensive PERI project solution – modular working platforms and access to all working areas. With a minimum of effort for the construction team, the modular scaffolding can easily be connected to VARIOKIT standard components using simple connection means.
1
/
5

Overview

The PERI VARIOKIT solution for balanced cantilever construction is a combination consisting of load-bearing, specially developed system components for this building method and VARIOKIT core components to complete the supporting structure. Based on the VARIOKIT Engineering Construction Kit, the rentable system components are quickly available. The bal-anced cantilever equipment can be adapted flexibly to accommodate a wide range of bridge cross-sections and geometries.

Reducing construction time
thanks to concreting sections up to 5.75 m long, as well as high load-bearing capacity and integrated hydraulics

Cost-effective project solutions
by combining practice-oriented and rentable system components based on the VARIOKIT Engineering Construction Kit and project-specific engineering

Safe access solutions
in all conditions due to compatibility with the PERI UP modular scaffolding kit

Technical Details

The balanced cantilever equipment transfers the fresh concrete loads into the supporting structure and moves the formwork from section to section. In order to accommodate the changes in the hollow box cross-section, a formwork solution consisting of VARIO girder wall formwork is used.

  • Concreting section weights up to 300 t using a standard application with two main frames
  • Section lengths up to 5.75 m possible
  • Maximum adaptability for transverse and longitudinal inclinations
  • For use in radii and spiral curves
  • Weight optimization due to a high level of material utilization
  • Exact, dimensionally-accurate concreting results through automatically setting up by means of integrated hydraulics
  • All modules can be re-used without any further processing

פרויקטים נבחרים

Show all references

מוצרים ושירותים נילווים