You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

מערכות פיגומים

ואריו-קיט VARIOKIT מסבך פלדה מודולרי VRB

The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
VARIOKIT Heavy-Duty Shoring Towers and Truss Girders serve as load-bearing falsework for the edge sections of a 412 m long motorway bridge.
Bolted connections reduce assembly time during installation. The centric bracing connection ensures a high load-bearing capacity.
VARIOKIT Heavy-Duty Trusses and Heavy-Duty Shoring Towers from PERI for bearing of high loads.
The VARIOKIT Heavy-Duty Truss for large spans offers high load-bearing capacity with a low dead weight. A further advantage is the easy assembly procedure.
VARIOKIT is compatible with the PERI UP scaffold system. As a result, this allows the required access points and working platforms to be quickly and safely erected.
1
/
6

Overview

The VRB truss girder is mainly used in bridge construction as shhoring of spans from 25 up to 40 m. It is characterized in particular by its extremely high load-bearing capacity – up to 3.000 kNm – at a relatively low dead weight.

Efficient use of materials
Accelerated construction processes throug reduced amount of trusses due to high load bearing capacity.

Quick length adjustment
Simple adjustment of the truss lengths to suit changing span widths with a minimum of different frames

High degree of safety
Integrable solutions for working platforms and access means with the PERI UP modular scaffold

Technical Details

  • Developed for spans up to 40 m and a permissible bending moment of 3000 kNm
  • Through the combination of different frame lengths and the telescopic function of the support frame, all spans can be fully realized  and any installation tolerances on the supports can be compensated

Frame types

The system consists of different types of  load and length optimized frames, which enable to continuously create every span with the corresponding combination.

A distinction is made between

Bearing Frame
for transferring the loads into the heavy-duty shoring towers

Coupling Joint Frame
for higher shear forces close to the support as well as for use at intermediate supports and coupling joints

Standard Frame
for use in the middle span

Standardized and centric connection of horizontal and vertical bracings enable optimal utilization of the load bearing capacity and lead to efficient material input.

מוצרים ושירותים נילווים