Pave

Industrial production of concrete blocks demands the adherence to high standards from the manufacturing systems that are used. The aim is to ensure a constantly high and repeatable concrete quality for many years even with a high throughput. Therefore the PERI Pave production pallets with their excellent properties are a reliable component of international manufacturing of concrete blocks.

The structure of the PERI Pave 

The multiplex core is produced through the cross-bonding of high-quality hard wood veneers from sustainably managed forests. The polypropylene coating, which has been especially developed for the utilisation in concrete block manufacturing plants, offers particularly high impact and abrasion resistance and thus ensures the longevity of the PERI Pave production pallets.

The advantages of PERI Pave

• Excellent compaction characteristics
  Due to the absolutely homogenous construction of the pallet, the bandwidth of compaction tolerances of the concrete products is limited to a minimum, uniform heights and consistencies are the consequence.
• Minimal deflection
  Even under highest loads, PERI Pave pallets show a minimal deflection due to the very load-bearing core. The thickness of the pallets is adjusted to the production conditions of each customer. So even after many years of use, the deflection will not exceed the requested maximum deflection.
• Effective and cost-saving utilisation
  The low net weight of the PERI Pave production pallet leads to energy savings during the transportation through the machine cycle. Cycle times are reduced as there are no withdrawal plates, so this increases the efficiency of production.
• Constant properties for repeatable concrete block quality
  The constant properties of the PERI Pave production pallet are maintained over a long period of time – also with high humidity in air-conditioned chambers as well as during the production of washed concrete products.

Thicknesses: 24 – 53 mm
Dimensions: max. 1500 x 3600 mm
Weight: about 740 kg / m³ with wood moisture of about 12%
Bonding: according to DIN EN 314-2

The bonding of the plywood veneers with each other as well as the coating on the face veneers is guaranteed for the complete term of utilization.

Suitable for every machine type due to the individual CNC milling of the pallet edges. Edges are sealed twice with permeable acrylic paint. The tolerances regarding flatness, thickness and dimensions are below the stipulations of the SLG regulations.

To optimally take care of your production pallets and thus to support the longevity of the pallets, we would like to recommend the following products to you:

To optimally take care of your production pallets and thus to support the longevity of the pallets, we would like to recommend the following products to you:

PERI Pave Release 

Release agent for the cleaning of production pallets which are used with earth-moist concrete in the paving industry.

PERI Pave Brush 

Half-shell brush with nylon bristles for the cleaning of the production pallets

• easy to exchange due to the half-shell design
• there are only minimum downtimes when exchanging the brushes
• the shaft remains, only the half-shells are exchanged
• no absorption of water and thus higher dimensional accuracy

Bristles from nylon (Poly PBT black)
Diameter of bristles: 2.0 mm
Height of bristles: about 40 mm x 50 mm
Material of the body: PP 20% GF
Maximum revolutions: about 250 – 300 rpm
A shaft has to be pre-drilled once according to a drawing.

PERI Pave Repair kit

Mechanical damage to the Pave surface can be repaired easily and fast with our repair kit.

PERI Pave Spraying system 

The release agent can be spread evenly on the pallet with individually adjustable spraying nozzles.

Jasmin Abt

Phone: +49 7309 950 4073
Fax: +49 7309 951 4073
mobile: +49 151 25007647

Contact via E-mail